3 WAYS TO FIND OUR PRODUCTS
- Select Product Type:
- Annunciators (Tattletale®) and relays
- Battery Chargers
- CAN/J1939 I/O Modules
- Controls & Actuators (Electro/Mechanical)
- Controls (Electronic)
- Controllers / Annunicators (Gas Compression)
- Displays (J1939/CAN) – Industrial
- Displays (J1939/CAN) – Marine
- Fluid Level Maintainers
- Fluid Level Switches
- Gauges (Electric)
- Gauges (J1939/CAN)
- Gauges (Mechanical)
- Gauges – Tachometers/hourmeters
- Panel Systems (Electronic Engines)
- Panel Systems (Mechanical Engines)
- Sensors/Instruments: Pressure
- Sensors/Instruments: Speed
- Sensors/Instruments: Temperature
- Sensors/Instruments: Vibration/shock
- Valves
Archive Information
The information and links below relate to older and legacy products, including models which:
- have been superseded by newer models
- are being phased out of production (e.g. as part of our Stage V Product Migration program)
- have been discontinued from production
- are only available to special order.
For full details of availability and compatibility with current products, please contact our engineers.
| 20VWC, 25VWC, A25VWC | Air Filter Restriction Swichgage®.
• Sales bulletin • Installation instructions |
| 45 series | Discontinued/phase-out FW Murphy Production Controls pressure Swichgage®. More info> |
| 45PE | Discontinued FW Murphy Production Controls pressure Swichgage® with snap-acting SPDT switches. • Sales bulletin • Installation Instruction |
| 751602 751603 |
UK-manufactured (plastic case) variants of these panels (models B2643 and B2647) were discontinued from production in June 2014. More info > US-manufactured (metal case) variations remain in production, but panel and connecting kit specifications may not be directly compatible. Please contact our technical support department for further advice. |
| 773 | Discontinued Tattletale® magnetic switch. Closest equivalent is ETS30S. |
| A200-2(P)(C) | Discontinued Modex Automation 2 channel annunciator, 96mm (w) x 48mm (h). |
| A200-3(P)(C) | Discontinued Modex Automation 3 channel annunciator, 96mm (w) x 48mm (h). |
| A200-4(P)(C) A201-4(P)(C) |
Discontinued Modex Automation engine/generator controllers, 96 x 96mm DIN. The range also included special variants A203-4, A210-4, A211-4, A213-4, A215-4 and A217-4. The nearest equivalents are the Autostart AS7xx controls. |
| A301 (Alpha front label) |
Discontinued Modex Automation special variant of the Manustart controller. Superseded on Slingtons/Hallmark generators by the A302(OS) - see below. |
| A302/A302OS (Alpha front label) |
Discontinued Modex Automation special variant of the Keystart 9600 range. Standard Keystarts have a rear facia switch bank for selection of power supply (12 or 24VDC) and fault input polarity (open/close to +ve/-ve during fault), but the A302(OS) is 1) factory preset for 12 or 24 VDC, 2) fault inputs are preset at closed to negative on fault. Nearest equivalent to the A302 is the Keystart 9600; nearest equivalent for the A302OS (AC sensing overspeed trip) is the Keystart 9602. |
| A401 (Alpha front label) |
A special variant of the Autostart AS700 produced for Slingtons/Hallmark generators. Differences from the AS700 include 1) special front label, with Alpha branding and keyswitch MANUAL mode (replacing TEST), 2) a manual mode output on pin 5 (instead of a magnetic pickup input), 3) different adjustment ranges for some timers, 4) the unit will NOT automatically start the engine if a mains fail occurs when the keyswitch is set to manual mode. |
| A500 series | Discontinued range of Modex Automation alarm / annunciator module, 96 x 96mm DIN. Many hardware variants were produced, each defined by a specification number (e.g. A110, A103). There is no direct Murphy equivalent. |
| A600-6/A600-4 | Discontinued Modex Automation engine/generator controller (A600-6) and AMF/ATS module (A600-4), specially produced for Dawson Keith Ltd. No direct equivalent. |
| A800 | 8 channel alarm/annunciator module, discontinued in Jan 2006. More info > |
| A86 | Discontinued automatic engine/generator controller, used as the main control module in some older Murphy panels. Please contact our sales engineers for further info about the A 86 and replacement panels. |
| A88 & A88F | Discontinued MurphyMatic® engine controller. • Installation Instructions |
| A900 | Engine/genset control modules, production discontinued in 2005. Includes models A901, A902 and A903. These control modules were used in the MGC900 series control panels. More info: • Bulletin • Installation Instructions • MGC900 genset panels |
| A91 | Discontinued MurphyMatic® engine controller. • Bulletin • Installation Instructions |
| AEC101 | Discontinued automatic engine control panel based on the Cascade CD101 controller. More info: - Sales bulletin |
| Alpha | Alpha branded products produced by Modex Automation for Hallmark/Slingtons generators. See entries above for A301, A302 and A401. |
| AMACS GSM | Discontinued GSM communication panel - more info. |
| AP12 | Discontinued alarm/annunciator module - more info. |
| AS3000 | Discontinued Autostart engine controller - more info. |
| AS705 | Engine/generator Autostart controller, discontinued from production in March 2010. • AS705 sales bulletin • AS705 installation instructions • Custom label for programmable LEDs (MS Word 6.0/95 format) • AS7xx programming reference and check sheet • AS7xx communications and PC software (AS7CK) |
| AS710 | Engine/generator Autostart controller, discontinued from production in Sept 2011. • AS710 sales bulletin • AS710 installation Instructions • AS7xx programming reference and check sheet • AS7xx communications and PC software (AS7CK) • AS7PROG hand held programmer application note |
| AS711 | Discontinued Modex Automation Autostart engine/generator controller. Originally superseded by model AS705 above. |
| AS720 | Discontinued Modex Automation Autostart module, similar to AS710 plus mains voltage monitoring. • AS720 sales bulletin • AS720 ready reference sheet (Installation) • AS7xx programming reference and check sheet • AS7xx communications and PC software (AS7CK) • AS7PROG hand held programmer application note |
| AS730 | Autostart generator controller, production discontinued in July 2005. • AS730 bulletin • AS730 installation instructions • AS7xx programming reference and check sheet • AS7xx communications and PC software (AS7CK) • Converting applications from AS730 to AS731 |
| AS731/AS732 | Autostart generator controllers, production discontinued in Sept 2007. Further information: • AS731 • AS732 |
| AS7PROG | Hand-held keypad for programming AS710 and AS720 Autostart controllers. • AS7PROG hand held programmer application note |
| ASM160 | Discontinued engine controller. Further info: • Bulletin • Installation and operation For replacement options, see our latest engine controls. |
| ASM170 | Discontinued engine controller. Further info: • Bulletin • Installation and operation For replacement options, see our latest engine controls. |
| ASM200 | A special MurphySwitch (California) designed unit, used only in Murphy Europe 200 series panels. Further info: • Bulletin • Installation and operation • Typical wiring diagram |
| ASM260 | A special MurphySwitch (California) designed unit, now discontinued. |
| AT series tachometers |
For the latest AT and ATH models released late 2016/early 2017, click here > For ATA/ATS/ATHA/ATHS models dated 2011-2016: • Installation Instructions • Advisory note for 24 to 12V voltage convertors, sleeved resistor type |
| AT67207 | • Bulletin • Installation and operation Throttle controller, discontinued in 2004. Superseded by the AT03069. The AT67207 had two separate versions for 12V or 24V DC operation; the replacement AT03069 has a dual 12/24V capability but requires an extra negative DC supply connection to terminal 4. |
| B6455 | Discontinued Autostart control panel for mechanical engines - more info. Superseded by the ML1000 and ML2000 control panels. |
| B6475 | Discontinued Autostart control panel. • Application note for Volvo ECU/CAN-based engines |
| B6497 | Discontinued Keystart panel for JCB engines • Sales bulletin |
| B6502, B6503, B6524, B6525 | Discontinued range of control panels for ECU/J1939-based Perkins/Caterpillar engines - more info. Superseded by the ML1000 and ML2000 control panels. |
| BC100 series | Discontinued range of constant current battery chargers, models BC101 through to BC108 were the predecessor of the BC700/BC701 series (also now discontinued - see below). 'B' option models had a 'boost' facility. Closest equivalent is the Sentinel range. |
| BC700/BC701 | A range of (ex-Modex Automation) 3 Amp constant current battery chargers, discontinued in mid-2004. BC700 models were for 12V systems, BC701 were for 24V systems. • Sales bulletin The closest equivalent chargers are the Sentinel range. |
| BC0812, BC0824 BC1212, BC1224 BC1812, BC1824 |
Discontinued range of 8, 12 and 18 Amp (12 or 24 V) battery chargers. The nearest Computronic Controls® equivalents are the Sentinel range. |
| BC1524, BC3012 | 15A/24V and 30A/12V high power battery chargers, variants of the discontinued Monitor range. For low ripple output alternatives (e.g. sealed batteries), see the Sentinel range. |
| BCA series | 3 or 5A, 12 or 24V battery chargers, now available as part of the Sentry range. For low ripple output alternatives (e.g. sealed batteries), see the Sentinel range. |
| BGT1 series | Discontinued Tankend™ fluid level controls. • Bulletin • Installation instructions See fluid levels section for nearest equivalents. |
| C267, C277, C287 | Phase-out FW Murphy Production Controls MODBUS RTU I/O expansion modules. • Installation and operation manual Can be used with Millenium MC series gas compressor controls, due for phase-out in July 2017. Check stock availability. |
| CB32 | Call out box. More info> |
| CD100 (Cascade) | The predecessor to the Cascade CD101.
Old CD100 literature: • CD100 bulletin • CD100 installation |
| CS2001 | Discontinued FW Murphy Production Controls Selectronic® Controller Scanner: • Bulletin |
| CST9632/9642 | CANstart model variants for fixed speed (1500/1800 RPM genset) engines, standard versions discontinued in Sept 2016. See installation instructions for more info. Consider using models 9631/9641 (for variable speed engines). |
| CVR/UVR/OVR series | AC under and over voltage relays. All models except UVR500 are now discontinued: • UVR500 • Discontinued models |
| CVT100 series | Discontinued Modex Automation range of general purpose DC signal current and voltage trip relays, housed in an 11 pin plug-in case • Sales bulletin. No direct Murphy equivalent. |
| CVT500/501 series | Discontinued range of general purpose current and voltage relays for use with DC (CVT500) and AC (CVT501) signals. • Sales bulletin. No direct Murphy equivalent. |
| CVT502, CVT506 and CVT508 |
Discontinued DC voltage relays (24VDC, 12VDC and 48VDC respectively). Several variations on these standard products were produced. • Sales bulletin. Consider Computronic Controls® LVD range as a possible alternative. |
| CVT503 | Discontinued Modex Automation temperature control relay, for engine jacket heater control using a VDO temperature sender. No direct equivalent. |
| CVT504 | Discontinued Modex Automation AC check-synch relay. No direct equivalent. |
| DCM series | Discontinued Modex Automation motor speed controller. No equivalent. |
| DF755-EX | Discontinued hazardous area variant of the FW Murphy Production Controls DF755. |
| DPC20 | Discontinued MurphyMatic® duplex pump controller. Click here to view bulletin (PDF format). |
| DS77 | Discontinued dual speed switch. Contact our sales engineers for further info. |
| DT1000(V)(H) | Discontinued Modex Automation 12 channel temperature indicator, 3 digit LED display, 48 x 96mm. |
| DT9600 | Digital tachometer Swichgage, discontinued in 1999. Contact our sales engineers for further info. |
| DT9800 series |
Discontinued range of digital tachometer Swichgages, including models DT9803, DT9804,
DT9805 and DT9806. • Bulletin • Installation Instruction |
| DV series | Discontinued FW Murphy Production Controls dump valves for scrubbers: • Bulletin • Installation Instruction The DV series has been superseded by DVU series from FW Murphy Production Controls. |
| DV850, DV875 | Discontinued FW Murphy Production Controls pneumatically controlled dump valves used in separator/scrubber applications. These units were discontinued in June 2002, and are superseded by models DVU150 and DVU175. |
| ECD series | A range of residual current earth leakage detector relays, discontinued in Feb 2008. More info > |
| Econostart ES8000 | An automatic mains fail module, originally designed as an enhancement to the Keystart series of manual controls. • Sales datasheet Production was discontinued in October 2003. |
| eGuard | Engine controller, unavailable from January 2015. |
| ELD series | Discontinued range of residual current earth leakage detector relays, originally manufactured by Brian Bennett Electrical Engineering Ltd. (BBEE) and Modex Automation. • Sales bulletin Standard models were the ELD2 (20mS fast response), ELD4 (slower, fixed trip times) and ELD5 (adjustable time response), but many variants and specials were also produced. The ELD range was superseded in Jan 2002 by a reduced number of standard ECD models, but this range has also subsequently been discontinued. |
| EMS447/448 | A range of microprocessor-based engine and equipment controllers - more info. In EMEA regions, the EMS447 and EMS448 are no longer available through Enovation Controls Ltd. As an alternative, please consider the MPC-10 or MPC-20 controllers. In North and South America, these controllers are subject to the Murphy Stage V product migration program. |
| EMS547 | A microprocessor-based engine and equipment controllers - more info. In EMEA regions, the EMS547 is no longer available through Enovation Controls Ltd. As an alternative, please consider the MPC-10 or MPC-20 controllers. For North and South America applications, please visit our US website page. |
| EMS689 | Discontinued microprocessor controllers for automatic irrigation pump applications, also used in control panel models B5010, B6183, B4518, B64184, B2248 and B3485. • Bulletin • Installation notes: throttle control |
| EN204 | Four function annunciator - more info. |
| ERC range | A range of larger diameter core balance transformers, optionally used with ELD and ECD earth current detector relays. ERC transformers were discontinued in March 2007. • Bulletin |
| ES2DP30 | Discontinued dual pressure sender (for EG series electric gages, etc), 30 psi. No direct equivalent. |
| ESI3 | Discontinued 3-way Engine Status Indicator, comprising LED bar-graph indication of oil pressure, engine temperature and battery voltage - more info. Production was discontinued in March 2006. |
| ET25 | Discontinued Modex Automation encapsulated timer (delay on energisation with blade connectors). No Murphy equivalent. |
| EVS | Discontinued electronic vibration switch. For more information, please visit the FW Murphy Production Controls website literature archive. |
| EVS-2 | Discontinued electronic vibration switch. For more information, please visit the FW Murphy Production Controls website literature archive. |
| FP350 | Discontinued MurphyMatic® NFPA-20 Type Fire Pump Controller |
| FSV | Discontinued fire shutoff valve. For more information, please visit the FW Murphy Production Controls literature archive. |
| GPM92 | Discontinued glow plug control module. • Bulletin |
| GsmControl-A GsmControl-X |
GSM modem communication modules, discontinued in September 2007: • Bulletin • Quick start guide |
| Guardian G150, G300, G600 series |
Discontinued range of Computronic Controls® high-power battery chargers - more info. |
| GV733 | Discontinued display for Cummins G-drive RS485 modbus systems. More info > |
| H33-SS | Discontinued MurphyMatic® lift pump control system. • Sales bulletin |
| HC9040 | Discontinued ignition powered panel tester. For more information, please visit the FW Murphy Production Controls literature archive. |
| HD35 | Discontinued digital hoursrun counter. • Sales bulletin. |
| HFT series | Discontinued Modex Automation High Frequency Trip relay - more info. See also OFR range. |
| HT100 | Discontinued Modex Automation humidity trip relay (11 pin plug in). Contact our sales engineers for further info. |
| HV(S)750 | HelmView display modules, discontinued March 2015:
|
| HV1000 (Helmview) | Discontinued display module for marine applications: • More info > |
| ID500 | Discontinued Modex Automation film scanner for packaging equipment. No direct equivalent. |
| IFD95 | Discontinued ignition failure device. For more information, please visit the FW Murphy Production Controls website literature archive. |
| iGuard | iGuard digital genset controller, production discontinued in January 2015. • Bulletin • Installation instructions • Installation Manual Insert – iMA iGUARD Mimic (repeater) annunciator |
| Keystart 7201 | Keystart engine controller, discontinued in July 2005: • Bulletin • Installation Instructions Closest equivalent is the Keystart 7210/7211 |
| Keystart 9000 / 9600 series | Discontinued 72mm and 96mm Keystart range with blade terminal connection: • Bulletin • Installation reference sheet The closest equivalent Keystart models are the 7210 series (replacing 72mm 9000 series) and 9620 series (replacing the 96mm 9600 series). See also: • Keystart 7210/9610 - retrofitting guide for older Keystarts. |
| Keystart 9003, 9004, 9005 |
Discontinued Keystart units, based on the Keystart 9000 range but with a timed preheat output and connection via 2 x 10 way two-part type terminal blocks. Contact our sales engineers for further info. |
| Keystart 9006, 9007 |
Discontinued variants of the Keystart 9000 range. Model 9006 is based on model 9001, but can be adjusted for use with a wider (higher) range of magnetic pickup (engine speed sensing) frequencies. Model 9007A is based on model 9006, but is designed for use with a remote Off-Run-Start switch (with a blind grommet in place of the usual Keyswitch). |
| Keystart 9610, 9611 |
Superseded by Keystart 9620 & 9621 in July 2009. |
| Keystart 9650, 9651, 9652 |
Variants on the discontinued Keystart 9600 series. Operation and connection is as 9600, 9601 and 9602, but the run output is designed for use with energised-to-stop fuel systems - contact our sales engineers for further info. |
| Keystart 9700 series |
Discontinued 96mm Keystart range with two-part screw terminal blocks at the rear: • Bulletin (PDF) • Installation reference Sheet (PDF) These models were superseded in 2005 by the Keystart 7210 and 9610 series. See also Keystart 7210/9610 - retrofitting guide for older Keystarts (PDF). |
| L1150, L1250 | Level controls for scrubbers, discontinued in Feb 2004, but parts/repairs available at current usage until 2006/07. Contact our sales engineers for further info and availability. |
| L1100, L1200 | Discontinued level switches for scrubbers: • Sales bulletin • Installation instructions The L1200 has been superseded by the LS200 series. |
| LFT series | Discontinued Modex Automation Low Frequency Trip relay - more info. No direct equivalent. |
| LLS series | Discontinued lead line pressure switch: • Bulletin • Installation Instructions |
| LM500-TF-ATEX | Discontinued ATEX variant of the LM500-TF oil level maintainer. • Bulletin • Installation Instructions |
| LM2000(S) | Oil level maintainer, discontinued from sale in EMEA region Feb 2013. • Bulletin • Installation Instructions Superseded by LM500(TF). |
| LPC series | Discontinued fire pump control panels - more info. |
| LR857 | Oil level maintainer. • Bulletin (EMEA models) • Bulletin (US models) • Installation Instructions • Product transition: LR857/LM2000 to LM500 Discontinued from sale in EMEA region Feb 2013. Superseded by LM500(TF). |
| LR900, LR901, LR900-EX | Discontinued level maintainers/switches: • Bulletin |
| M100/110/120 series | A range of basic instrument control panels based on the PV101 display. Standard models are scheduled for phase-out in early 2015, although customer-specific variants may remain in production beyond this date. • Bulletin Superseded by the ML series. |
| M300/310/320 series | A range of advanced instrument control panels based on the PV101 display and PV series gauges. Standard models are scheduled for phase-out in early 2015, although customer-specific variants may remain in production beyond this date. • Bulletin Superseded by the ML series. |
| Manustart | Discontinued Modex Automation engine controller, manual start. Superseded by (but not pin compatible with) the Keystart range. |
| Mark II series | Discontinued range of digital fault annunciators, used mainly in gas compressor applications. For more information, please visit the FW Murphy Production Controls website literature archive. See our compressor controls section for a range of replacement controllers. |
| Mark III series | Discontinued digital fault annunciators, used mainly in gas compressor applications. For more information, please visit the FW Murphy Production Controls website literature archive. |
| Mark IV series | Discontinued digital fault annunciators, used mainly in gas compressor applications. For more information, please visit the FW Murphy Production Controls website literature archive. |
| MC series | Phase-out/discontinued gas compressor controller modules. For more information, please visit the FW Murphy Production Controls website literature archive. |
| MDDM | Phase-out/discontinued diagnostic display. Check availability. • Sales bulletin • Installation instructions |
| MDDM-MOD | Phase-out/discontinued diagnostic display. Check availability. • Sales bulletin • Installation instructions |
| MDM45 | Discontinued 4 - 20mA loop monitor Swichgage®. For more information, please visit the FW Murphy Production Controls website literature archive. |
| MFU series | Discontinued Modex Automation Mains Failure relays (3 phase, no neutral) - more info. Originally superseded by PFR range below. |
| MGC900 | Engine/genset control panels, production discontinued in 2005. These panels were based on A900 control modules. More info: • Bulletin • Installation Instructions Superseded by later MGC series panels |
| MGC920 | Discontinued modular genset control panels. • Sales bulletin Replaced by later MGC series panels |
| MGC921 | Modular genset control panels. Superseded by later MGC series panels |
| MGC2000 | Discontinued genset control panels. • Sales bulletin Replaced by later MGC series panels |
| Microstart MS1A, MS1D |
Discontinued Modex Automation full AMF generator controller. Models included MS1A (for use with AC coiled contactors) and MS1D (for use with DC coiled contactors). Models with a 'C' suffix are fitted with a remote communications option. Further info: • Sales bulletin • Installation & connection • Programming • Operation • Remote alarms ('R') option and relay board (MSRP) • RS232 Communications ('C') option Microstart was superseded by (but not pin compatible with) the Autostart AS7xx, AS731 and AS732 controls. |
| Millennium Controller | See MC series. |
| MLA MLink series gauges | Phase-out/discontinued gauges and audible alarm for use with MDDM diagnostic display: • MLA20/MLA35/MLAA sales bulletin • MLA20/MLA35 gauges installation instructions • MLAA20 audible alarm installation instructions |
| Monitor | Discontinued range of Computronic Controls® high-power battery chargers - more info. |
| MP series | Discontinued MurphyMatic® electric motor pump controller. Please contact our sales engineers for further details. |
| MSV-375 | Discontinued fuel shutoff valve for diesel engines. • Sales bulletin. |
| MTHM90 | Discontinued digital tachometer/hourmeter. Nearest equivalent is the MTH6. |
| OFR500 | Discontinued AC power over frequency relays. No direct Murphy equivalent. • Sales bulletin |
| OFR501 | Similar to discontinued OFR500 but with 49 - 52 Hz or 400 - 475 Hz adjustment range. |
| OLR500 | 3 phase AC overload (over current) relay, 110 or 240VAC auxiliary power supply. No Murphy equivalent. • Sales datasheet |
| OLR600, OLR605 | Discontinued AC over current relays. No direct Murphy equivalent. The OLR600 was for use for use with star-connected 5 Amp CTs; the OLR605 was for use with delta-connected 5 Amp CTs. |
| OPLFC-D | Discontinued 4.5" pressure Swichgage with diaphragm, for dirty water and slurry applications. • Sales bulletin |
| OPLFNC | Discontinued 4.5" pressure Swichgage with normally closed contacts. • Bulletin • Installation instructions • Installation Instruction supplement |
| OST100/OST101 UST100/UST101 |
• Sales bulletin Discontinued Modex Automation over/under speed/frequency trip relays with 11 pin plug in case, 12 or 24V DC auxiliary supply, 110/240VAC input, 40 - 70Hz adjustment range. No Murphy equivalent. |
| OVT series | Discontinued Modex Automation Under Voltage Trip relays - more info. Originally superseded by OVR range below. |
| OVR/UVR/CVR series | AC under and over voltage relays. All models except UVR500 are now discontinued: • UVR500 • Discontinued models |
| PEM series | • Sales bulletin Pilot Earth Monitoring relay (for checking the low resistance integrity of earth conductors), originally manufactured by Brian Bennett Electrical Engineering Ltd. (BBEE) and Modex Automation. Production discontinued in July 2004. |
| PFR300R | Discontinued 3 phase, 3 wire phase failure relay for use with 380/400/415VAC phase to phase systems • Sales bulletin. |
| PFR500 series | Discontinued AC phase failure (under voltage) relays for 3 phase, 3 wire (no neutral) connection. More info > |
| POR500 series | Discontinued over voltage equivalent to PFR above. More info > |
| PS640 | Discontinued microprocessor-based irrigation control panel: • Sales bulletin • Installation instructions |
| PS660 | Discontinued microprocessor-based irrigation control panel: • Sales bulletin • Installation instructions |
| PV10 | The PV10 diagnostic display is in production, but no longer on general sale. The PV10 has been superseded by the PV25. |
| PV100 | The original PowerView® display module, more info here. Superseded in March 2007 by the PV101. |
| PV101-A | Superseded Jan 2013 by the PV101-C. |
| PV750 | Phase-out/discontinued PowerView display module: • More info > • Superseded by PV780 From 1st March 2015, the PV750 is not available for purchase in EMEA regions. Final discontinuation from US production was in June 2015. |
| PV1000 | Discontinued PowerView display module: • More info > • Superseded by PV750 and PV450 |
| PXMS / PXDGS | Pressure transmitters, discontinued in 2005. For more information, please visit the FW Murphy Production Controls website literature archive. The closest equivalent models for PXMS 4-20mA variants are the PXT-K series. There is no direct equivalent for the PXDGS series 1-5V transmitters. |
| PXT | 4-20mA pressure transmitters. For more information, please visit the FW Murphy Production Controls website literature archive. Check availability, but the PXT has been mostly superseded by the PXT-K range. |
| RMU16 | Discontinued remote monitoring unit. • Installation Instruction |
| RCR/S and RCR/L | Discontinued elastic retaining straps for the Modex Automation range of plug-in timers and relays. |
| S1012, S1024 | Discontinued range of 10A/12V and 10A/24V battery chargers: • Bulletin • Current battery chargers |
| S1400 | Discontinued Microcontroller for use in gas compressor applications. For more information, please visit the FW Murphy Production Controls website literature archive. |
| S1500 | Discontinued Microcontroller for use in gas compressor applications. For more information, please visit the FW Murphy Production Controls website literature archive. |
| S260 | Selectronic® S260 controller, a discontinued product of Murphyswitch California. Limited spares may be available - please contact our engineers. |
| SCC series | Discontinued satellite communication system. For more information, please visit the FW Murphy Production Controls website literature archive. |
| SD35HL | Discontinued digital tachometer with underspeed and overspeed switches. • Bulletin/Installation |
| Sentinel 70/140 series |
Phase-out/discontinued range of Computronic Controls® switch mode battery chargers - more info. For the latest replacement chargers, see the Sentinel series. |
| SGM45F | Discontinued range of 4.5" pressure gauges with integal 4-20mA transmitters. For more information, please visit the FW Murphy Production Controls website literature archive. |
| SHD45 | Digital tachometer/hourmeter, panel mount, 4.5 inch diameter: • Bulletin • Installation instructions The SHD45 series was discontinued in mid 2003, and superseded by the SHD30-45. |
| SIM007 | Discontinued Modex Automation temperature simulators with an open board construction. The nearest equivalent is the (DIN cut-out mounted) SM200 below. |
| SM series | Discontinued Tankend™ fluid level controls. • Bulletin • Installation instructions See Fluid levels section for nearest equivalents. |
| SM200, SMT200, SMT200-TR |
Ex-Modex Automation temperature simulators, designed for form-fill, film and bag sealing (packaging) equipment. • Sales bulletin/installation SM200 and SMT200 modules are still in production. SMT200-TR modules are no longer produced. |
| SM7 | Discontinued Modex Automation temperature simulators, 8 pin plug in. Nearest equivalent is the (DIN cut-out mounted) SM200 above. |
| SM82 | Phase-out/discontinued range of Computronic Controls® switch mode battery chargers - more info. |
| SNS/SNL | See Sentinel 70/140 |
| ST4X4, ST10HC, STA110, STA16-PB, | Discontinued variants of the ST series annunciators. |
| STAS, STASTD | Discontinued diode and diode/time-delay packages, accessories for ST series annunciators. No direct equivalent. |
| TC100, TC101, TC100X, TC101X TC100Z, TC100RT | Discontinued Modex Automation temperature controllers, for connection/mounting in an 11pin base: • Datasheet There is no Murphy equivalent/replacement product. |
| TC200D | Discontinued Modex Automation temperature controllers. • Datasheet There is no Murphy equivalent/replacement product. |
| TC400 | Discontinued Modex Automation temperature controllers: • Datasheet There is no Murphy equivalent/replacement product. |
| TC500(D)(T) TC1000(D)(T) |
Discontinued Modex Automation temperature controllers, designed for mounting in a 92 x 92mm (DIN standard) panel cut-out. The TC500 series had a rotary dial to set temperature; the TC1000 used three decade thumbwheel switches. The 'D' option provided a 'deviation' meter (to indicate deviation between set and actual temperatures). The 'T' option provided an alarm relay that tripped at at a pre-set number of degrees above or below the set temperature (as detailed on the label). There is no Murphy equivalent/replacement product. |
| TD35 | Dual channel digital temperature Swichgage. Production discontinued in mid 2003. Further information (PDF format) : • Bulletin • Installation instructions |
| Thermocouples | The Murphy TC, RTD and RTDT ranges of thermocouples, RT probes and transmitters for engine temperature sensing are available from catalogue section 10. For information on the discontinued range of Modex Automation thermocouples (mostly J and K type for use in the process control industry), click here. Several thousand variations of Modex thermocouple were produced, each type identified by a 4 figure tag number - please contact our sales engineers for details of each variant. |
| TR100, TR200, TR300, TR301, TR1400 | Ex-Modex Automation delay on energisation time relays with 8 and 11 pin plug-in cases. The range included models TR100, TR100Z, TR101, TR200, TR300, TR300Z, TR301, TR301Z, TR302, TR1400, TR1401. Click here to view bulletin (PDF file). The range was discontinued when the plug-in casing was made obsolete. |
| TR25 | Ex-Modex Automation, 8 pin plug-in, delay on energisation timer. TR25P ('preset') variants had a recessed (screwdriver adjustable) time setting potentiometer. AC supply variants were discontinued in Jan. 2000, DC variants in Jan. 2003. • Sales bulletin |
| TR24, TR26, TR27 | Discontinued special variants of the TR25. Contact our sales engineers for full information. |
| TR40 | Ex-Modex Automation, 8 pin plug-in, interval timer. AC supply variants were discontinued in Jan. 2000, DC variants in Jan. 2003. • Sales bulletin. |
| TR900 | Ex-Modex Automation three attempt start timer, 8 pin plug-in. Many variants were produced. Discontinued as for TR100. No direct equivalent. • Sales bulletin |
| TR1100 | Ex-Modex Automation true delay on de-energisation timer, 8 pin plug in. Discontinued as for TR100 above. No Murphy equivalent. • Sales bulletin |
| TR1500 | Ex-Modex Automation asymmetric recycling timer, 8 pin plug in. Discontinued as for TR100 above. No Murphy equivalent. • Sales bulletin |
| TRC200D | Discontinued, special variant of the TRC200 (see below) produced for Circuit Engineering Marketing Co. (CEMCO) Ltd. The unit allowed remote selection (by panel switch) of 2 set temperatures (for duty and standby use). No Murphy equivalent. |
| TRC200 TRC200-T |
Discontinued Modex Automation temperature controllers. • Datasheet There is no Murphy equivalent/replacement product. |
| TRC500 TRC500-T |
Discontinued Modex Automation temperature controllers, 92 x 92mm DIN cut-out mounted with LED display indication of set/actual temperature. No Murphy equivalent. |
| TT12Z-TP/ TT24-TP |
Discontinued Modex Automation temperature controllers, with a 'two-tier' open PCB construction. • Sales datasheet |
| TTDJ | Phase-out digital fault annunciator. For more information, please visit the FW Murphy Production Controls website literature archive. Consider using the TTD™ series as an alternative. |
| UST100/UST101 | See OST above. |
| UFR500 | Discontinued AC power under frequency relays. No direct Murphy equivalent. Sales bulletin >. |
| UFR501 | Similar to discontinued UFR500 but with 48 - 51 Hz or 325 - 400 Hz adjustment range. |
| UT1 series | Discontinued Tankend™ fluid level controls. • Bulletin • Installation instructions See Fluid levels section for nearest equivalents. |
| UVR/OVR/CVR series | AC under and over voltage relays. All models except UVR500 are now discontinued: • UVR500 • Discontinued models |
| UVT series | Discontinued Modex Automation Under Voltage Trip relays - more info. Originally superseded by UVR series above. |
| VR300 | Discontinued Modex Automation single phase AC under-voltage trip relay, 8 pin (octal) plug-in case. • Datasheet The devices were factory set (internally) to trip at a customer specified voltage. The closest equivalent is the DIN rail mounted, user-adjustable UVR series. |
| VS2N | Discontinued pneumatic version of the VS2 vibration switch. No direct equivalent. |
| W0162 / W0163 | Discontinued panels for Cummins B and C-series engine control and protection. More info: • Sales bulletin |
| WD107 | Discontinued model from WD series panel range, for mobile equipment applications. • Circuit diagram |
| WD275 | Discontinued WD series panel for pump applications, with high/low water pressure Swichgage and 15 minutes adjustable shutdown lockout. • Circuit diagram |
| WDU0277 | Discontinued panels for Deutz engines. More info: • Sales bulletin |
